5.8GHz Microwave Motion Detacted White Round Appearance Suitable Panel Light
Features:
1. 5.8GHz microwave motion sensor with dimmable function.
2. Smart swithes and dimmers when detecting movement of objects.
3. Dual PD, for panel light.
4. Detached version flexible installalion.
5. All parameters can be setting by remote control.
6. IP 20 with 5 years warranty.
7. Sensitive and reliable.
Product Description
| Operating voltage | 120-240VAC,50/60Hz |
| Switching capacity | Max.200W(120VAC)Max.400W(240VAC) |
| Stand-by power | ≤1w |
| control method | on/off / 1-10v dimming/remote control |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Detection area | 25%/50%/75%/100% |
| Hold time | 5s/30s/1min/3min/5min/10min/20min/30min |
| stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ |
| stand-by dimming level | 10%/20%/30%/50% |
| daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable |
| interfaace | 6-pole pluggable clamp terminal(L,N,N,L',1-10V+,1-10V-,)for 0.75-1.5mm² cable |
| Mounting height | 2.5-6m /8.2-19.68ft |
| deteation range | MaxØ14m/45.93ft |
| motion detection | 0.5–1,5m/s |
| operating temperature | –25℃–+60℃ |
| IP rating | IP 20 |
| Warranty | 5 years |
ON/OFF Control Detection Area Daylight Threshold Stand-by Period
Warranty 5 years Hold Time Stand-by Dimming Level
Detection Range
This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
Typical installation height 2.5-6m.
Mechanical structure
With remote control to set all parameters
With six poles to easily connect with LED driver and power supply
With two small magnets and round 3M glue, secure to the light fixture
Wiring diagram
Dimensions (mm)
Daylight Priority
Dusk/Dawn sensor:
Dual-PD technology brings a fully automatic dusk/dawn sensor which can tell the difference between
natural light and LED light, to ensure the light will be off when needed.
With Daylight priority function, HD410VR is able to differentiate artificial light
brightness from natural light after installed inside the fixture, and automatically turn
off light when ambient brightness exceeds preset lux level.
Precondition of Daylight priority:
1. Standby period is +∞;
2. Standby dimming level is on 10%, 20% or 30% ;
3. Daylight threshold is on 30Lux, 50Lux, 80Lux or 120Lux.
Application——Lux on/off
Light automatically on With insufficient Light dims to stand-by Light off when ambient
when ambient ambient brightness, level if no motion lux level is higher than
brightness is lower light dims to 100% detected after holdtime preset lux amount.
than preset lux level. when motion detected Installation Method:
Application Demo 1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.
With sufficient daylight, With insufficient daylight, After the last detection and
even when motion detected, when motion detected, light ON. the present hold time
light remains OFF. elapsed, light OFF.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
When motion is detected, After people leave the detection After the last detection and
the sensor will switch on the area, light remains 100% the present hold time
light to 100% brighteness. brightness within hold time. elapsed, light OFF.
3.Function Demo-Dimmable control/Corridor function
With sufficient daylight, With insufficient After the last detection, After the stand-by period
even when motion daylight when the light will be dimmed light off.
detected,light motion detected, down to the stand-by
remains off light on, dimming level
(10%,20%,30% or 50%)
after holdtime.
Application:
User Notes:
1.Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting height and movement volume.
4. Conduct test on sunny days without the lampshade which will affect the tested lux value.
Memory & Apply Mode
1. Press "ON/OFF button" to turn on the light or off.
2. To reset the parameters, Please follow the steps as below:
Step 1 - Press ON, to turn on the light if it was off at the start.
Step 2 - Press "Start" to the well-setting sensor.
Step 3 - Press the button of Detection range, Hold time, Stand-by dimming level,
Stand-by period and Daylight threshold one after the other in sequence (Press "+/-" to
set parameters).
Step 5 – Press “Memory” to memorize the settings.
Note: The interval of each parameter setting shall be controlled within 30s.
Isolated Setting Mode
1. Press "ON/OFF button" to turn on the light or off. Press "Scene", the remote will
activate settings that were saved last or remain at the factory default settings.
2. To reset the parameters, Please follow the steps as below:
Step 1 - Press ON, to turn on the light if it was off at the start.
Step 2- Press any button of "Scene", Test" and "Apply" to begin the sensor detection
mode.
Step 3 - Press the button of Detection range, Hold time, Stand-by dimming level,
Stand-by period and Daylight threshold one after the other in sequence.
3. To programme other lights in the array that have similar sensors to the same
programme.
Step 1 - Press "ON" to the second sensor
Step 2 - Press "Apply"
Notes:
1. Settings will be saved automatically and remain until you press reset again.
2. Light will flicker when setting each parameter.
3. The icon will flash when setting the corresponding parameter.
Product Tags:
|
|
Round Dimmable Motion Sensor 5.8GHz Microwave Motion Detacted Suitable Panel Light Images
|
